|
The Leader for Safety and Sanitation in the Foodservice Industry |
 |
|
DISPENSING WITH THE KENKUT
Version 2.5
|
#1 |
|
Remove film or foil from cardboard cutter box.
Place into KENKUT with plastic end spindles or dowel rod.
To order dowel rods or replacement blades Click Here
|
#2 |
  |
Pictures shows the proper placement of the slide-cutter.
Place slide-cutter onto the front wall of the Kenkut dispenser in the slot
provided, making sure
it is centered lengthwise on the Kenkut. Pull out plastic film over the
slide-cutter to desired length,
allowing it to stick to the slide cutter with a slight tension. Best result is
when film does not scrape
along the slide-cutter while pulling out. Push down lightly on slide cutter’s
blue button and slide left
to right or right to left to cut.
For proper use of dispensing aluminum foil make
sure the metal foil blade is inserted
properly Click Here For Close Up
Grasp foil and pull to the desired length
With slight tension, tear with a downward motion,
left to right or right to left just as you would with
the cardboard cutter box.
