Proper Use OfThe Kenkut
KENKUT LOGO The Leader for Safety and Sanitation in the Foodservice Industry
KENKUT Products Home
ORDER HISTORY CONTACT US LINKS

DISPENSING WITH THE KENKUT

#1

Remove film or foil from cardboard cutter box.
Place into KENKUT with plastic end spindles or dowel rod.
NOTE: Dowel rods will fit newer KENKUT models with 8 ribs (instead of 4) molded on each inner side wall.
To order dowel rods or replacement blades Click Here
Make sure blade is inserted properly Click Here For Close Up

#2 Pull leading edge of film or foil over blade, CLOSE LID!!!

#3   

           

#4   
GRASP FILM OR FOIL AT
BOTH END CORNERS		 LIFT UP SLIGHTLY AND PULL TO DESIRED LENGTH

                                                    

#5

                  WITH DOWNWARD MOTION, TEAR AS WITH CUTTER BOX,
                      Left To Right-Right To Left- Or Use Karate Chop Method
 
 

For proper use of dispensing aluminum foil make sure the metal foil blade is inserted
properly Click Here For Close Up

  • Grasp foil and pull to the desired length

  • With slight tension, tear with a downward motion,
    left to right or right to left just as you would with
    the cardboard cutter box.

To return to the New Kenkut Version 2.5 with the slide cutter
 click here

HOME | ORDER | HISTORY | CONTACT US | LINKS